Analog Pure Silver Power Cord

Analog Power Cable with a filter for suppressing circuit high-frequency RF interferences. This circuit cable is made of pure silver. Current conductors are as follows:line and neutral – a twisted round wire 13 AWG, ground (GND) – a twisted round wire 11 AWG.The selection of a wire with a round cross section for this power cable is based on the necessity to suppress high-frequency interferences generated in an electric circuit.One approach to increasing the external surface area of a conductor is to use a ribbon wire for interconnects. This improves the transmission of high-frequency signals and, as the result, stabilizes the phase relationship among the individual components of the spectrum of a sound signal in the complete frequency range. This, in turn, improves such important parameters of the resultant signal as transparency, softness, depth and air extension. However, the requirements for a power cable for applications in high-quality audio equipment are different. In this case, the transmission of high-frequency signals (for a power cable, these are circuitry, RF and EMI interferences) dramatically reduces the sound quality and must be minimized. Therefore, any cross section, other than the round one, of a current-carrying conductor (at fixed AWG) leads to the increase of the external surface area and, consequently, permits the transmission of undesirable high-frequency signals.This ultimately produces a very detrimental effect on the quality of the resultant sound signal.Hi-Fi equipment, regardless of its quality, is not capable of completely suppressing the distortion caused by the AC power source. In addition to the above-described advantage, xMatrix Power Cord is equipped with a built-in filter for supplemental suppression of circuitry high frequency and RF interferences, as well as two-stage external RF and EMI filters. For a complete electrical synchronization with a central conductor, input and output contacts of cable connectors are plated with rhodium over the silver substrate. Summary: xMatrix analog power cord possesses a number of features differentiating it from other products of this kind on the audio market: 13 AWG line and neutral pure silver twisted wire. 11 AWG ground pure silver-twisted wire. Current-carrying conductors with a round cross section reducing the effect of high-frequency interferences. Built-in filter for high-frequency “parasitic” signals. Two-stage external RF/EMI filtration system. Completely(100%) covered heavy-duty electromagnetic shield. Modified Arrow Hart rhodium over silver plated contacts of wall plug. Modified Audio grade WATTGATE rhodium over silver  plated contact IC plug. The combination of these design features makes this cable one of the best products available on today’s audio market.